Technical Information of SFP Transceiver

• Application/Usage: Data Networking, Optical Network
• Ethernet Technology: 10 Gigabit Ethernet
• Interfaces/Ports Details: 1 x LC/PC Duplex 10GBase-SR Network
• Media Type Supported: Optical Fiber
• Fiber Optic Cable Standard: 62.5 µm, 50 µm
• Fiber Mode Supported: Multi-mode
• Network Technology: 10GBase-SR
• Form Factor: Hot-Swappable
• DDM: Yes
• Connector Type: Dual-LC

Network & Communication for 10GBPS Transceiver Module

• Cable Type: Ethernet 10GBase-SR
• Compliant Standards: IEEE 802.3ae
• Connectivity Technology: Wired
• Max Transfer Distance: 984 ft
• Optical Wave Length: 850 nm

Power Description of Multi-mode Transceiver

• Transmitter Type: VCSEL
• Receiver Type:: PIN
• Transceiver Power: -7.3~-1dBm
• Receiver Sensitivity: < -11.1dBm
• Powerbudget:3.8dB
• Receiver Overload: 0.5dBm
• Typical Power Consumption: ≤0.6W
• Max Operating Temperature: 158 degree Fahrenheit
• Min Operating Temperature; 32 degree Fahrenheit

Network Management & Protocol System

• IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI
• Networking Protocol: 10 Gigabit Ethernet

Performance

• Data Transfer Rate: 10GBPS
• Max Data Rate: 10.3125Gbps

Weight & Dimensions

• Height: 0.3 Inch
• Width: 0.5 Inch
• Depth: 2.2 Inch

Compatibility

• Cisco Nexus 5000 Series Switches
• Cisco Nexus 7000 Series Switches
• Knowledge of SFP-10G-SR Compatibility-
• When you buy SFP-10G-SR transceivers for your switch, you are told to buy "brand" SFP-10G-SR from your network equipment manufacturer in order to keep your system running properly and safely. The "brand" SFP-10G-SR compatibility may never have any issues and the price is therefore very high, usually several hundred dollars. But since the transceivers are all manufactured based on MSA (Multi-source Agreement), which strictly define the operating characteristics of optical transceivers so that system vendors may implement ports in their devices that allow MSA compliant transceivers produced by name brand, as well a third party vendor, to function properly. Transceivers that manufactured by third party vendors, usually called compatible transceivers, such as compatible Cisco SFP-10G-SR transceivers. Usually, these compatible transceivers are tested on the corresponding switch before selling, therefore, the compatibility can also be ensured. Cisco SFP-10G-SR matrix can be found here.